This is my Stuart Turner No.9 and 10v steam plant with a Stuart Turner Babcock 504 boiler this wasn't built by myself it was bought on eBay in March 2011 and built by a very talented West Midlands model engineer but i added to it by machining and building a Stuart Turner 10v vertical steam engine along with all the extra associated copper pipework which i was a little apprehensive about doing given my 1st attemps were a disaster on my 1st steam plant but following Keith's YouTube model engineering steam videos.
I got the confidence to add my Stuart 10v vertical steam engine along with all the extra associated copper pipework without messing up the appearance of this fantastically engineered model steam plants look of the original owners pipework installation on this steam plant i have also replaced the external Stuart Turner gas poker burner with two Campingaz Tristar 2600btu gas burners connected to one Campingaz 904 gas bottle via a twin tap regulation valves on high pressure gas which keeps the 504 boiler maintained at 60psi whilst running both engines although one burner can be switched off if the safety valve blows off at anytime during running.
I also added a large steam whistle mounted on the right hand side of the 504's boiler smoke box parallel to the chimney on a brass bracket fabricated from some brass angle bent into shape and silver soldered into a right angle bracket to bolt to the boilers smokebox the steam plant is fitted with one of Keith Appletons steam oil trap condensers and a matching water feed tank that Keith made for the previous owner of this steam plant which feeds the boiler with water via the Stuart No.9's boiler feed pump via a bypass valve that redirects water back to the feed tank when the tap is opened once the boiler level is up to a satisfactory water level but it can be set to maintain the water level as the boiler level drops in the sight glass as steam is used by the two engines.
Thanks Jed Pusczykowski.